Australia - English - Department of Health (Therapeutic Goods Administration)

instrumed - 46751 - bone holding forceps - a surgical instrument used for grasping and holding a bone during a surgical procedure. it is typically strongly constructed and has a scissors-like design that may or may not be self-retaining with ring handles or curved shank handles. it is made of high-grade stainless steel and is available in various sizes. the working end can have a wide variety of jaws designs, e.g., curved serrated jaws, straight toothed jaws, or profiled wrench-like jaws with grooves to provide extra grip of the bone. this is a reusable device.

Australia - English - Department of Health (Therapeutic Goods Administration)

johnson & johnson medical pty ltd t/a depuy synthes - 47900 - orthopaedic implant calibration pin - a cylindrical rod used preoperatively as a precision guide to align an orthopaedic aiming arm with. it is inserted through the guiding locking holes of the adjustable aiming arm and its profiled distal tip is engaged into the locking holes of the intramedullary nail providing a reference point whereby the drill guides and the rest of the aiming arm can be correctly set. this is a reusable device.

Australia - English - Department of Health (Therapeutic Goods Administration)

zimmer biomet pty ltd - 33968 - screwdriver, surgical - a tool that fits into a screw head in order to apply rotation to tighten/loosen/remove a screw during a surgical procedure. it typically has a high-grade stainless steel shaft with a distal end dedicated to fit into a screw head that may be slotted, phillips (cross head), pozidriv (supadriv), torx, hex (allen), robertson (square), spanner head (twin pins), polydrive, or one-way (clutch). the proximal end of the shaft may have a handle for manual use, or it may have a profiled tang that fits into an interchangeable screwdriver handle. this is a reusable device.

Australia - English - Department of Health (Therapeutic Goods Administration)

merit medical australia pty ltd - 35094 - catheter guide wire - inqwire diagnostic guide wires are made from stainless steel, have a continuous ptfe coated coil, inside core wire and a safety wire. the core wire is fixed at the proximal end only and extends to a specified distance from the distal end. the distal segment of the core wire has a profiled taper. the core wire enhances the stiffness of the guidewire. the safety wire extends the full length of the guidewire and is welded at both the distal and proximal end. the merit diagnostic guide wires are intended to facilitate the placement of devices during diagnostic and interventional procedures.

Australia - English - Department of Health (Therapeutic Goods Administration)

medtools pty ltd - 47633 - surgical screwdriver, single-use - title: hammer head 5mm square offset wrench with 3 engagement points. gmdn 47633 surgical screwdriver, single-use, non-sterile. description: robotics are becoming common place in orthopaedic joint replacement surgery with the stryker mako system being one of the leading technologies. as an example, this system requires navigation trackers to be attached to the patient?s operative limb. currently these trackers are positioned by the surgeon and hand tightened with a screwdriver. the mako trackers have 5mm square nuts at each articulated joint. this square nut needs to be tightened with a significant torque to prevent loosening during the case, one that is not achieved easily or consistently with a screwdriver piece. often access to the nut is made difficult because of the location on the patient?s limb and adjoining joints or abdomen interfering with the leverage arc. the hammer head overcomes these difficulties by having these defining features; claims: fig 1: square profile measuring 5.1mm for accurate and easy engagement of the square nut. fig 2: secondary square profile measuring 5.1mm but at 45 degrees to fig 2 resulting in more leverage arc positions for difficult and confined areas. fig 3: third square profile measuring 5.1mm located at the end of the handle piece which allows the user to rapidly tighten the nut finger tight before using fig 1 or fig 2 to finish off the tightening process. fig 4: offset wrench ? this enables easier access to the nut fig 5: solid medical grade 316 stainless steel construction or similar. fig 6: the square corners are profiled into 4 * 1.5mm diameter circles to make tool engagement and release easier. it allows for forgiveness and prevents locking onto the nut by allowing blood, tissue and foreign debris to be pushed out from the main square profile into these voids. fig 7: optimal length and diameter to easily fit into surgeon?s hand. hammer head design allows user to grasp handle with index, middle, ring and little finger while using the thumb to press down on the offset cylinder fig 4 ensuring even and consistent pressure while tightening or loosening the nut. this prevent slippage which would otherwise injure the patient or surgeon. medtools pty ltd 3a cheyne walk castlecrag, nsw 2068 0448788524 yeuns@aol.com 28.10.2020

Australia - English - Department of Health (Therapeutic Goods Administration)

smith & nephew pty ltd - 46751 - bone holding forceps - a surgical instrument used for grasping and holding a bone during a surgical procedure. it is typically strongly constructed and has a scissors-like design that may or may not be self-retaining with ring handles or curved shank handles. it is available in various sizes. the working end can have a wide variety of jaws designs, e.g., curved serrated jaws, straight toothed jaws, or profiled wrench-like jaws with grooves to provide extra grip of the bone. this is a reusable device

Australia - English - Department of Health (Therapeutic Goods Administration)

zimmer biomet pty ltd - 32847 - fixation device, internal, nut - a sterile, single-use, profiled block composed of metallic or non-mettalic material with threads on its inside surface, and designed to securely fasten a bone fixation bolt.

Australia - English - Department of Health (Therapeutic Goods Administration)

dio australia pty ltd - 33968 - screwdriver, surgical - the locator implant attachment system is designed for use with overdentures or partial dentures, retained in whole or in part by endosseous implants in the mandible or maxilla. a non-powered tool intended to fit into a screw head (e.g., slotted, cross/hex head) for the application of rotation to introduce/remove a screw (e.g., craniofacial bone screw, dental screw) into/from a patient in association with a surgical procedure [e.g., orthopaedic, dental, computer assisted surgery (cas), image registration]. it may also be used to connect/disconnect a device to/from another device attached to a patient (e.g., implant component, fiducial marker). the proximal end of the device may have a handle for manual use or a profiled tang that fits into an independent chuck or power driver; it is typically made of metallic and/or polymer materials. this is a reusable device.

Australia - English - Department of Health (Therapeutic Goods Administration)

alphatec australia pty ltd - 33968 - screwdriver, surgical - a non-powered tool intended to fit into a screw head (e.g., slotted, cross/hex head) for the application of rotation to introduce/remove a screw (e.g., craniofacial bone screw, dental screw) into/from a patient in association with a surgical procedure [e.g., orthopaedic, dental, computer assisted surgery (cas), image registration]. it may also be used to connect/disconnect a device to/from another device attached to a patient (e.g., implant component, fiducial marker). the proximal end of the device may have a handle for manual use or a profiled tang that fits into an independent chuck or power driver; it is typically made of metallic and/or polymer materials. this is a reusable device.

Jordan - English - JFDA (Jordan Food & Drug Administration - المؤسسة العامة للغذاء والدواء)

مستودع أدوية سليمان طنوس وأولاده - suleiman tannous & sons co. ltd - lamotrigine 50 mg - 50 mg